🎉 Up to 70% Off Selected ItemsShop Sale
Tesla Desktop Supercharger Replica Charging Station Unique 3D Printed Toy
Surprise your loved one with this Tesla Replica Desktop supercharger! Designed based on the actual supercharging stations around the world.
**CORD IS NOT INCLUDED WITH PURCHASE***
This supercharger is 10% bigger than others and has been scaled up so that it can fit micro-USB, USB-C, and other charging cords
PRODUCT INFORMATION: This is a replica of Tesla's Supercharger and has been made into a desktop charging station for your phone.
FEATURES: Desktop supercharger to charge your phones.
FUNCTION|DURABILITY: Made with PLA plastic. Extremely sturdy and lightweight. Comes in multiple pieces and assembled together.
PRODUCT SPECIFICATIONS: Assembly is required. Please follow the step by step instructions below in this listing on how to assemble this supercharger.
SET INCLUDES: All pieces needed to put this together are included in the package. Assembly instructions are listed below.
Step 1
Insert your cable through the base of the supercharger as shown.
Step 2
Insert the charging cable through the hole in the red piece as shown.
Step 3
With the cord inserted through the red piece, insert and press the red piece into the backside of the white piece (the one that has the space for the charging cable cord.
Step 4
Lay the charging cable cord on the white piece as shown.
Step 5
Fit the top white piece over the bottom white piece as shown. Ensure that the charging cable is not pinched anywhere.
Step 6
Fit the 2 side pieces as well as the bottom piece into place and snap-fit everything. At this point, you can glue the pieces together if you are happy with the fit and placement of the charging cable cord.
Step 7
All done! There should be enough give where you can pull the charging cable cord through the supercharger to your desired length.
Step 8
When your phone is not plugged in, you can fit the end of the cord as shown in the photo.
This item is made out of bio-friendly PLA (Polylactic Acid) plastic and is accomplished by printing plastic layer by layer, very slowly. PLA is considered the most 'earth-friendly' plastic since it is 100% biodegradable and not toxic. We use high-quality printing options with large infill and outer perimeter shells. This item is printed in multiple pieces and assembled. All 3D Printed products sold are made through Plastic Extrusion, meaning plastic is heated and layered upon itself to build the final part. As a result, the completed product will sometimes have imperfections as part of the printing process, also known as "layer lines".
*Please note all 3D printed items are unique and no two products are the same. The surface will not be perfectly smooth as you can see the layers of the object and there might be little bumps here and there as this is a property of this type of 3D printing. The color of the item may vary slightly from the display picture due to the filament supplier.
--Disclaimer--
**This is not an officially licensed product and is only considered FAN ART, the item was modeled and remixed.
**CORD IS NOT INCLUDED WITH PURCHASE***
This supercharger is 10% bigger than others and has been scaled up so that it can fit micro-USB, USB-C, and other charging cords
PRODUCT INFORMATION: This is a replica of Tesla's Supercharger and has been made into a desktop charging station for your phone.
FEATURES: Desktop supercharger to charge your phones.
FUNCTION|DURABILITY: Made with PLA plastic. Extremely sturdy and lightweight. Comes in multiple pieces and assembled together.
PRODUCT SPECIFICATIONS: Assembly is required. Please follow the step by step instructions below in this listing on how to assemble this supercharger.
SET INCLUDES: All pieces needed to put this together are included in the package. Assembly instructions are listed below.
Step 1
Insert your cable through the base of the supercharger as shown.
Step 2
Insert the charging cable through the hole in the red piece as shown.
Step 3
With the cord inserted through the red piece, insert and press the red piece into the backside of the white piece (the one that has the space for the charging cable cord.
Step 4
Lay the charging cable cord on the white piece as shown.
Step 5
Fit the top white piece over the bottom white piece as shown. Ensure that the charging cable is not pinched anywhere.
Step 6
Fit the 2 side pieces as well as the bottom piece into place and snap-fit everything. At this point, you can glue the pieces together if you are happy with the fit and placement of the charging cable cord.
Step 7
All done! There should be enough give where you can pull the charging cable cord through the supercharger to your desired length.
Step 8
When your phone is not plugged in, you can fit the end of the cord as shown in the photo.
This item is made out of bio-friendly PLA (Polylactic Acid) plastic and is accomplished by printing plastic layer by layer, very slowly. PLA is considered the most 'earth-friendly' plastic since it is 100% biodegradable and not toxic. We use high-quality printing options with large infill and outer perimeter shells. This item is printed in multiple pieces and assembled. All 3D Printed products sold are made through Plastic Extrusion, meaning plastic is heated and layered upon itself to build the final part. As a result, the completed product will sometimes have imperfections as part of the printing process, also known as "layer lines".
*Please note all 3D printed items are unique and no two products are the same. The surface will not be perfectly smooth as you can see the layers of the object and there might be little bumps here and there as this is a property of this type of 3D printing. The color of the item may vary slightly from the display picture due to the filament supplier.
--Disclaimer--
**This is not an officially licensed product and is only considered FAN ART, the item was modeled and remixed.
Select Tesla Logo Color
From $19.99
Tesla Desktop Supercharger Replica Charging Station Unique 3D Printed Toy—
$19.99
More Images
Tesla Desktop Supercharger Replica Charging Station Unique 3D Printed Toy
Surprise your loved one with this Tesla Replica Desktop supercharger! Designed based on the actual supercharging stations around the world.
**CORD IS NOT INCLUDED WITH PURCHASE***
This supercharger is 10% bigger than others and has been scaled up so that it can fit micro-USB, USB-C, and other charging cords
PRODUCT INFORMATION: This is a replica of Tesla's Supercharger and has been made into a desktop charging station for your phone.
FEATURES: Desktop supercharger to charge your phones.
FUNCTION|DURABILITY: Made with PLA plastic. Extremely sturdy and lightweight. Comes in multiple pieces and assembled together.
PRODUCT SPECIFICATIONS: Assembly is required. Please follow the step by step instructions below in this listing on how to assemble this supercharger.
SET INCLUDES: All pieces needed to put this together are included in the package. Assembly instructions are listed below.
Step 1
Insert your cable through the base of the supercharger as shown.
Step 2
Insert the charging cable through the hole in the red piece as shown.
Step 3
With the cord inserted through the red piece, insert and press the red piece into the backside of the white piece (the one that has the space for the charging cable cord.
Step 4
Lay the charging cable cord on the white piece as shown.
Step 5
Fit the top white piece over the bottom white piece as shown. Ensure that the charging cable is not pinched anywhere.
Step 6
Fit the 2 side pieces as well as the bottom piece into place and snap-fit everything. At this point, you can glue the pieces together if you are happy with the fit and placement of the charging cable cord.
Step 7
All done! There should be enough give where you can pull the charging cable cord through the supercharger to your desired length.
Step 8
When your phone is not plugged in, you can fit the end of the cord as shown in the photo.
This item is made out of bio-friendly PLA (Polylactic Acid) plastic and is accomplished by printing plastic layer by layer, very slowly. PLA is considered the most 'earth-friendly' plastic since it is 100% biodegradable and not toxic. We use high-quality printing options with large infill and outer perimeter shells. This item is printed in multiple pieces and assembled. All 3D Printed products sold are made through Plastic Extrusion, meaning plastic is heated and layered upon itself to build the final part. As a result, the completed product will sometimes have imperfections as part of the printing process, also known as "layer lines".
*Please note all 3D printed items are unique and no two products are the same. The surface will not be perfectly smooth as you can see the layers of the object and there might be little bumps here and there as this is a property of this type of 3D printing. The color of the item may vary slightly from the display picture due to the filament supplier.
--Disclaimer--
**This is not an officially licensed product and is only considered FAN ART, the item was modeled and remixed.
**CORD IS NOT INCLUDED WITH PURCHASE***
This supercharger is 10% bigger than others and has been scaled up so that it can fit micro-USB, USB-C, and other charging cords
PRODUCT INFORMATION: This is a replica of Tesla's Supercharger and has been made into a desktop charging station for your phone.
FEATURES: Desktop supercharger to charge your phones.
FUNCTION|DURABILITY: Made with PLA plastic. Extremely sturdy and lightweight. Comes in multiple pieces and assembled together.
PRODUCT SPECIFICATIONS: Assembly is required. Please follow the step by step instructions below in this listing on how to assemble this supercharger.
SET INCLUDES: All pieces needed to put this together are included in the package. Assembly instructions are listed below.
Step 1
Insert your cable through the base of the supercharger as shown.
Step 2
Insert the charging cable through the hole in the red piece as shown.
Step 3
With the cord inserted through the red piece, insert and press the red piece into the backside of the white piece (the one that has the space for the charging cable cord.
Step 4
Lay the charging cable cord on the white piece as shown.
Step 5
Fit the top white piece over the bottom white piece as shown. Ensure that the charging cable is not pinched anywhere.
Step 6
Fit the 2 side pieces as well as the bottom piece into place and snap-fit everything. At this point, you can glue the pieces together if you are happy with the fit and placement of the charging cable cord.
Step 7
All done! There should be enough give where you can pull the charging cable cord through the supercharger to your desired length.
Step 8
When your phone is not plugged in, you can fit the end of the cord as shown in the photo.
This item is made out of bio-friendly PLA (Polylactic Acid) plastic and is accomplished by printing plastic layer by layer, very slowly. PLA is considered the most 'earth-friendly' plastic since it is 100% biodegradable and not toxic. We use high-quality printing options with large infill and outer perimeter shells. This item is printed in multiple pieces and assembled. All 3D Printed products sold are made through Plastic Extrusion, meaning plastic is heated and layered upon itself to build the final part. As a result, the completed product will sometimes have imperfections as part of the printing process, also known as "layer lines".
*Please note all 3D printed items are unique and no two products are the same. The surface will not be perfectly smooth as you can see the layers of the object and there might be little bumps here and there as this is a property of this type of 3D printing. The color of the item may vary slightly from the display picture due to the filament supplier.
--Disclaimer--
**This is not an officially licensed product and is only considered FAN ART, the item was modeled and remixed.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Surprise your loved one with this Tesla Replica Desktop supercharger! Designed based on the actual supercharging stations around the world.
**CORD IS NOT INCLUDED WITH PURCHASE***
This supercharger is 10% bigger than others and has been scaled up so that it can fit micro-USB, USB-C, and other charging cords
PRODUCT INFORMATION: This is a replica of Tesla's Supercharger and has been made into a desktop charging station for your phone.
FEATURES: Desktop supercharger to charge your phones.
FUNCTION|DURABILITY: Made with PLA plastic. Extremely sturdy and lightweight. Comes in multiple pieces and assembled together.
PRODUCT SPECIFICATIONS: Assembly is required. Please follow the step by step instructions below in this listing on how to assemble this supercharger.
SET INCLUDES: All pieces needed to put this together are included in the package. Assembly instructions are listed below.
Step 1
Insert your cable through the base of the supercharger as shown.
Step 2
Insert the charging cable through the hole in the red piece as shown.
Step 3
With the cord inserted through the red piece, insert and press the red piece into the backside of the white piece (the one that has the space for the charging cable cord.
Step 4
Lay the charging cable cord on the white piece as shown.
Step 5
Fit the top white piece over the bottom white piece as shown. Ensure that the charging cable is not pinched anywhere.
Step 6
Fit the 2 side pieces as well as the bottom piece into place and snap-fit everything. At this point, you can glue the pieces together if you are happy with the fit and placement of the charging cable cord.
Step 7
All done! There should be enough give where you can pull the charging cable cord through the supercharger to your desired length.
Step 8
When your phone is not plugged in, you can fit the end of the cord as shown in the photo.
This item is made out of bio-friendly PLA (Polylactic Acid) plastic and is accomplished by printing plastic layer by layer, very slowly. PLA is considered the most 'earth-friendly' plastic since it is 100% biodegradable and not toxic. We use high-quality printing options with large infill and outer perimeter shells. This item is printed in multiple pieces and assembled. All 3D Printed products sold are made through Plastic Extrusion, meaning plastic is heated and layered upon itself to build the final part. As a result, the completed product will sometimes have imperfections as part of the printing process, also known as "layer lines".
*Please note all 3D printed items are unique and no two products are the same. The surface will not be perfectly smooth as you can see the layers of the object and there might be little bumps here and there as this is a property of this type of 3D printing. The color of the item may vary slightly from the display picture due to the filament supplier.
--Disclaimer--
**This is not an officially licensed product and is only considered FAN ART, the item was modeled and remixed.
**CORD IS NOT INCLUDED WITH PURCHASE***
This supercharger is 10% bigger than others and has been scaled up so that it can fit micro-USB, USB-C, and other charging cords
PRODUCT INFORMATION: This is a replica of Tesla's Supercharger and has been made into a desktop charging station for your phone.
FEATURES: Desktop supercharger to charge your phones.
FUNCTION|DURABILITY: Made with PLA plastic. Extremely sturdy and lightweight. Comes in multiple pieces and assembled together.
PRODUCT SPECIFICATIONS: Assembly is required. Please follow the step by step instructions below in this listing on how to assemble this supercharger.
SET INCLUDES: All pieces needed to put this together are included in the package. Assembly instructions are listed below.
Step 1
Insert your cable through the base of the supercharger as shown.
Step 2
Insert the charging cable through the hole in the red piece as shown.
Step 3
With the cord inserted through the red piece, insert and press the red piece into the backside of the white piece (the one that has the space for the charging cable cord.
Step 4
Lay the charging cable cord on the white piece as shown.
Step 5
Fit the top white piece over the bottom white piece as shown. Ensure that the charging cable is not pinched anywhere.
Step 6
Fit the 2 side pieces as well as the bottom piece into place and snap-fit everything. At this point, you can glue the pieces together if you are happy with the fit and placement of the charging cable cord.
Step 7
All done! There should be enough give where you can pull the charging cable cord through the supercharger to your desired length.
Step 8
When your phone is not plugged in, you can fit the end of the cord as shown in the photo.
This item is made out of bio-friendly PLA (Polylactic Acid) plastic and is accomplished by printing plastic layer by layer, very slowly. PLA is considered the most 'earth-friendly' plastic since it is 100% biodegradable and not toxic. We use high-quality printing options with large infill and outer perimeter shells. This item is printed in multiple pieces and assembled. All 3D Printed products sold are made through Plastic Extrusion, meaning plastic is heated and layered upon itself to build the final part. As a result, the completed product will sometimes have imperfections as part of the printing process, also known as "layer lines".
*Please note all 3D printed items are unique and no two products are the same. The surface will not be perfectly smooth as you can see the layers of the object and there might be little bumps here and there as this is a property of this type of 3D printing. The color of the item may vary slightly from the display picture due to the filament supplier.
--Disclaimer--
**This is not an officially licensed product and is only considered FAN ART, the item was modeled and remixed.
